The FC 2KP-EW/A Series modular AC-AC frequency converter system was designed to deliver a clean sine-wave output from ″dirty″ generator voltage under extreme environmental conditions.
The FC 2KP-EW/A Series modular AC-AC frequency converter system was designed to deliver a clean sine-wave output from ″dirty″ generator voltage under extreme environmental conditions.
This series of Eurocard (Plug-in) DC-DC converters are designed for 19″ Rack-mount industrial applications. The 200W units deliver 12V, 24V, 48V, 125V or custom and operate from supply voltages of 24Vdc, 48Vdc, 125Vd or custom. A railway quality version of this design is also available.
The PDC 250-HSA-P59 series of fully encapsulated DC-DC converters are convection cooled via a heatsink assembly fins. The 250W units are entirely potted with a thermally conductive MIL-grade silicon rubber compound, which provides immunity to shock, vibration, moisture, dust, salt and other contaminants, and ensures heat dissipation throughout the modules.
The RWR 212-P200L series of RIA12 railway DC-DC converters have an input voltage surge withstand capacity 3.5 times greater than the nominal input voltage for 20 milliseconds. The 200W converters meet the requirements of EN50155 for electronic equipment used on railway rolling stock.
The PFC 65R-D3 series IP66-rated, rugged railway quality AC-DC power supplies with active PFC-input deliver up to 300W output power. The units convert a universal AC-input voltage of 95-264Vac to 24Vdc, 48Vdc or 110Vdc.
50W high input voltage railway DC-DC converter employs the latest SiC semiconductor technology to deliver high conversion efficiency, high power density and small form factor. Design features also include no optocouplers, low component count and high MTBF.
The 300W heavy-duty, industrial DC-DC converters are installed in IP66-rated diecast aluminum packages which provide protection from the ingress of water from powerful jets, metallic dust, dust, fog, sand, oil, salt, insects and other environmental contaminants. The input and output are via sealed cable glands, circular connectors or custom connections.
The CSH 500-F6 is a 500VA addition to our line of high input voltage DC-AC sine wave inverters. The units invert 600Vdc industrial input voltage (450V to 800Vdc range) to an isolated sine wave output of 115Vac or 230Vac continuous. The design topology allows for higher input voltages of up to 1200Vdc.
The 100W railway DC-DC converters operate from a high input voltage 900Vdc (525V-1270Vdc) and deliver 24Vdc, 48Vdc, 110Vdc regulated output voltages. They meet EN50155 for electronic equipment used on rolling stock.
CSI 500-D5H IP66-rated convection cooled DC-AC sine wave inverters were developed for transportation, mining, marine, military and telecom applications that require a robust, waterproof, dust-proof and sand-proof AC-output solution.