The CSI 280-F3 series of rugged, compact, DC-AC inverters deliver up to 300VA sine wave output voltage. They offer fully isolated ″clean″ sinusoidal output voltage of 115VAC at 400Hz/60Hz or 230VAC at 50Hz. They typically operate from 24V, 48V, 110V or 125Vdc sources.
The CTP 1K-3U3SF series 1kVA 3-phase DC-AC inverters offer 3-phase continuous outputs of 208Vrms (line-to-line) at 60 or 400Hz, or 3-phase 380Vrms or 400Vrms (line-to-line) at 50 or 60Hz. Phase-to-neutral voltages of 115Vrms, 220Vrms or 240Vrms can also be used. The units operate from DC voltages of 24V, 48V, 110V, 125Vdc or custom.
3-phase DC-AC inverters deliver 208Vrms line-to-line 3-phase continuous at 60Hz or 400Hz. A 115Vrms phase-to-neutral output also possible
The CSI 100-3W-F1 series of DC-AC inverters deliver up to 100VA with pure sine wave output voltage. The inverters offer a wide operating input range of 20-60Vdc, which allows operation from 24Vdc, 36Vdc and 48Vdc input sources in a single unit.
The CTP 300R-F7 series DC-AC inverters with 3-phase pure sine output voltage designed for railway applications. The 300VA inverters meet the stringent requirements of EN50155 for electronic equipment used on rolling stock.
The CSI 30-D1 and CSI 50-D1 (IP66) Series of rugged, low voltage DC-AC inverters are designed for powering CCTV systems in transportation, mining, marine, oil rigs and other severe environments.
The CSI 200-XX/24F3 and CSI 300-24/24FX series of rugged, high performance DC-AC inverters are designed and built for 24Vac applications that require a clean, pure sine wave output voltage. They deliver 200VA and 300VA sine wave output voltage respectively.
The CSI 1K-3U2 & CSI 1K-3U3 series of rugged, modular DC-AC inverters deliver a regulated pure sine wave output of 115Vac continuous at 400Hz or 60Hz, or 230Vac continuous at 50Hz. Standard DC-input voltages include 24V, 36V, 48V, 125V, 250Vdc or custom. The inverters are suitable for a broad range of heavy-duty industrial applications that require clean, stable AC-power.
The RSI 1K-HSA-F31 series of railway DC-AC sine wave inverters deliver up to 1000VA with natural air convection – no forced air or attachment to a heatsinking surface is required. The series meets the requirements of EN50155 for electronic equipment used on railway rolling stock.
1000VA, IP66-rated DC-AC sine wave inverter with convection cooling is designed for applications where a suitable heatsinking surface is not available. The inverter converts 24Vdc (21-230Vdc range) input to 230Vac continuous at 50Hz
