This series of fully encapsulated, railway quality DC-DC converters have an input voltage surge withstand capability of 385Vdc for >1 second (3.5Vn for 20msec min.), comfortably meeting the requirements of RIA12. RIA12 is the UK specification for the protection of traction and rolling stock equipment from transients and surges in DC control systems
The CSI 100-24V24AH-AA-PEL portable inverter system with built-in battery bank and charger is designed for operation in heavy-duty applications in the field. The output is a pure sine-wave voltage suitable for delicate test equipment and similar loads. The charger section operates from typical AC voltages worldwide.
The RWY 200-D2 (IP66) Series of railway quality DC-DC converters meet the requirements of EN50155. The converters are enclosed in IP66-rated die cast aluminum packages with sealed connectors, which provide protection from the ingress of moisture, sand, oil, metallic dust and other contaminants.
The CTP 300R-F7 series DC-AC inverters with 3-phase pure sine output voltage designed for railway applications. The 300VA inverters meet the stringent requirements of EN50155 for electronic equipment used on rolling stock.
The BAP 5KR-72/24-3U7 DC-DC converter is designed for driving low voltage 24Vdc equipment in 5kW railway applications. The unit converts 72Vdc input voltage (43dc to 101Vdc range), to 24Vdc/200A. The converter meets the requirements of EN50155.
The HVI 2KR-3U3 series of high input voltage, railway quality DC-DC converters deliver up to 2kW output power. They accept 750Vdc input (525V to 1300Vdc range). Single output voltages include 24V, 36V, 48V, 110Vdc or custom.
The BAP 319R-HSA-F4 series of railway quality DC-DC converters deliver up to 500W with natural convection cooling. The converters can be mounted on a chassis or DIN-rail. No fans or installation on a heat-sinking surface required.
This series of IP66-rated railway DC-DC converters delivers up to 300W output power. With an input voltage surge withstand capability of 3.5Vn for 20msec, the converters meet the requirements of RIA12.
This series of Eurocard (Plug-in) DC-DC converters are designed for 19″ Rack-mount industrial applications. The 200W units deliver 12V, 24V, 48V, 125V or custom and operate from supply voltages of 24Vdc, 48Vdc, 125Vd or custom. A railway quality version of this design is also available.
This BAR 250R-D3 series of IP66-rated, railway DC-DC converters have an input voltage surge withstand capability of 3.5Vn for 20msec, the converters meet RIA12, the specification for the protection of traction and rolling stock equipment from transients and surges in DC control systems.
