The series of low-profile railway quality DC-AC sine wave inverters deliver up to 1000VA pure sine wave output voltage. The inverters accept supply voltages of 24Vdc, 36Vdc, 48Vdc, 72Vdc, 96Vdc, 110Vdc or custom, with wide EN50155 input ranges.
The RSI 100-D1 series of railway DC-AC sine wave inverters are designed for train and mobile applications that require IP66-rated protection. Installed in IP66-rated waterproof, die cast aluminum packages with sealed connectors, the units are protected from the ingress of rain, humidity, sand, dust, metallic dust, oil and other contaminants.
This ultra-rugged 3-phase convection cooled power supply is designed for driving low voltage 24V, 48V, or 125Vdc equipment in severe environments. Typical applications include electro-mechanical lifting and positioning equipment, winches, pumps, and other industrial machinery and equipment.
The CSH 500-F6 is a 500VA addition to our line of high input voltage DC-AC sine wave inverters. The units invert 600Vdc industrial input voltage (450V to 800Vdc range) to an isolated sine wave output of 115Vac or 230Vac continuous. The design topology allows for higher input voltages of up to 1200Vdc.
The 100W railway DC-DC converters operate from a high input voltage 900Vdc (525V-1270Vdc) and deliver 24Vdc, 48Vdc, 110Vdc regulated output voltages. They meet EN50155 for electronic equipment used on rolling stock.
The FCP 1K-F7W series of AC-AC frequency converters offer split-phase AC-output stage for various configuration requirements. They operate from a PFC universal input of 95V to 264Vac.
CSI 500-D5H IP66-rated convection cooled DC-AC sine wave inverters were developed for transportation, mining, marine, military and telecom applications that require a robust, waterproof, dust-proof and sand-proof AC-output solution.
The RWY 200-HSA-P2 series of fully encapsulated railway quality DC-DC converters offer pure convection cooling by a heatsink assembly attached to their under-surface. The converters can be mounted to a chassis or DIN-rail.
This 5kW, rack-mount AC-DC power system is constructed with up to five 1kW plug-in modules assembled in a 4U x 19” x 15” card-frame. Each 4U x 16HP x 304 mm plug-in module has a built-in redundancy diode for parallel connection or N+1 redundant operation, including hot-insertion.
This modular, rack-mount AC-DC power supply system with PFC input delivers 4500W or 3000W with N+1 redundancy. The system is built with three heavy-duty 1500W PFC 1K5 power supply modules assembled on a 3U x 19” rack-mount cradle (the CR 3U-3).
