High input voltage (450V to 800Vdc) industrial DC-AC sine wave inverters


The compact sine wave inverters are cooled by conduction and natural convection – no fans required

600Vdc Input, 400VA Industrial Quality DC-AC Sine Wave Inverter

High frequency conversion enables high efficiency, compact construction and low weight.

ABSOPULSE has recently released the CSH 300-F6 and CSH 400-F6 series of high input voltage DC-AC sine wave inverters. The units use microprocessor controlled, high frequency PWM technology to deliver 300VA and 400VA pure sinewave output voltage respectively. The inverters convert 600Vdc industrial input voltage (450V to 800Vdc range) to an isolated sine wave output of 115Vac continuous at 60Hz or 400Hz, or 230Vac continuous at 50Hz. The design topology allows for higher input voltages of up to 1200Vdc.

The high input voltage DC-AC sine wave inverters are designed for industrial applications that require clean sine wave AC-output voltage. They are suitable for operation in industrial automation and control, transportation, power plants and electrical utilities.

High frequency conversion enables high efficiency, a compact construction of 210 x 64 x 365 mm and low weight. The inverters are cooled by conduction via base-plate and by natural convection through the cooling slots and require no fans. Most heat generating components are installed on aluminum heatsink blocks which are thermally connected to the base plate. This also ensures exceptional mechanical ruggedness. The internal boards are conformal coated to provide protection against humidity and airborne contaminants. The units are typically chassis mounted.

The input and output are filtered for low noise. The input meets EN55022 Class A with wide margins. Class B available on request. This ensures that the inverters can be used in EMI sensitive environments without additional filtering. An optional output-fail alarm (Form C) is available. The units are designed for compliance with C22.2 No. 107.1 – 01, UL 458 and EN/UL60950-1 standards. Electronic protection includes input surge clamping, overload and short circuit protection, as well as thermal shutdown with automatic recovery. Large design headroom and the exclusive use of components with established reliability contribute to a high MTBF.

Other output power levels are also available.

ABSOPULSE Electronics designs and manufactures one of the broadest ranges of heavy-duty industrial and railway quality sine wave inverters available on the market today. Customized and fully custom.

To discuss these inverter designs or any of your power conversion requirements, please contact us.

Key Specifications

  • Input: 600Vdc input (450V to 800Vdc range);
  • Input voltages of up to 1200Vdc are possible;
  • Output: 115Vac continuous at 60Hz/400Hz, or 230Vac continuous at 50Hz;
  • Cooling by conduction and natural convection (no fans);
  • 0°C to +50°C operating temperature range – no derating;
  • Designed to comply with C22.2 No. 107.1-01, UL 458 and EN/UL60950-1;
  • Conformal coating for protection against humidity and airborne contaminants;
  • 85% efficiency at full load;
  • Full electronic protection;
  • Compact construction;
  • F6 chassis mount package: 210 x 64 x 365 mm (8.3” x 2.5” x 14”) W x H x D.

 

Generic Data sheet – CSH 300-F6 Series

Generic Data sheet – CSH 400-F6 Series

Your requirements – Request a Quotation

Leave a Reply

Your email address will not be published. Required fields are marked *