The HTP 300-FX and HTP 500-FXW series of compact, three-phase, high voltage input AC-DC power supplies deliver up to 300W and 500W output power respectively.

The CSI 1K-3U2 & CSI 1K-3U3 series of rugged, modular DC-AC inverters deliver a regulated pure sine wave output of 115Vac continuous at 400Hz or 60Hz, or 230Vac continuous at 50Hz. Standard DC-input voltages include 24V, 36V, 48V, 125V, 250Vdc or custom. The inverters are suitable for a broad range of heavy-duty industrial applications that require clean, stable AC-power.

The BPM 300-F0 is a compact battery presence monitor (BPM) designed to indicate whether the backup battery is no longer connected to the backup system in industrial applications. Without this unit, it is hard to detect battery presence in real time. This BPM is designed for systems with 3A max battery current.

This series of 100VA AC-AC frequency converters convert a universal 95V-264Vac input to 115Vac continuous at 60Hz or 400Hz, or 230Vac continuous at 50Hz. High DC-input voltage versions of this design that accept 120Vdc to 350Vdc are also available.

The FC 2KP-EW/A Series modular AC-AC frequency converter system was designed to deliver a clean sine-wave output from ″dirty″ generator voltage under extreme environmental conditions.

The VFC 500 variable AC power source delivers up to 500VA at any frequency 40 … 440Hz, with output continuously adjustable from 0 … 264Vrms. The power source is suitable for a diverse range of industrial, engineering, academic and laboratory applications.

This 1000W series of high input voltage, wide input range AC-DC power supplies with active power factor correction (PFC) operate over a 180V to 480V AC-input range, 400Vac nominal. Outputs include 24Vdc, 48Vdc, 110Vdc, 125Vdc or custom.

The PDC 250-HSA-P59 series of fully encapsulated DC-DC converters are convection cooled via a heatsink assembly fins. The 250W units are entirely potted with a thermally conductive MIL-grade silicon rubber compound, which provides immunity to shock, vibration, moisture, dust, salt and other contaminants, and ensures heat dissipation throughout the modules.

The RSI 1K-HSA-F31 series of railway DC-AC sine wave inverters deliver up to 1000VA with natural air convection – no forced air or attachment to a heatsinking surface is required. The series meets the requirements of EN50155 for electronic equipment used on railway rolling stock.

The DC-DC converters are designed for rugged industrial applications that require high input voltages and wide DC-input ranges. The units accept a nominal input voltage of 1000Vdc, and offer an 800Vdc to 1200Vdc operating input range. The 500W converters deliver 36V, 48V, 110V, 125dc or custom outputs.