The FC 2KP-EW/A Series modular AC-AC frequency converter system was designed to deliver a clean sine-wave output from ″dirty″ generator voltage under extreme environmental conditions.

This series of IP66-rated railway DC-DC converters delivers up to 300W output power. With an input voltage surge withstand capability of 3.5Vn for 20msec, the converters meet the requirements of RIA12.

This series of Eurocard (Plug-in) DC-DC converters are designed for 19″ Rack-mount industrial applications. The 200W units deliver 12V, 24V, 48V, 125V or custom and operate from supply voltages of 24Vdc, 48Vdc, 125Vd or custom. A railway quality version of this design is also available.

This BAR 250R-D3 series of IP66-rated, railway DC-DC converters have an input voltage surge withstand capability of 3.5Vn for 20msec, the converters meet RIA12, the specification for the protection of traction and rolling stock equipment from transients and surges in DC control systems.

The VFC 500 variable AC power source delivers up to 500VA at any frequency 40 … 440Hz, with output continuously adjustable from 0 … 264Vrms. The power source is suitable for a diverse range of industrial, engineering, academic and laboratory applications.

This 1000W series of high input voltage, wide input range AC-DC power supplies with active power factor correction (PFC) operate over a 180V to 480V AC-input range, 400Vac nominal. Outputs include 24Vdc, 48Vdc, 110Vdc, 125Vdc or custom.

The PDC 250-HSA-P59 series of fully encapsulated DC-DC converters are convection cooled via a heatsink assembly fins. The 250W units are entirely potted with a thermally conductive MIL-grade silicon rubber compound, which provides immunity to shock, vibration, moisture, dust, salt and other contaminants, and ensures heat dissipation throughout the modules.

The RSI 1K-HSA-F31 series of railway DC-AC sine wave inverters deliver up to 1000VA with natural air convection – no forced air or attachment to a heatsinking surface is required. The series meets the requirements of EN50155 for electronic equipment used on railway rolling stock.

The DC-DC converters are designed for rugged industrial applications that require high input voltages and wide DC-input ranges. The units accept a nominal input voltage of 1000Vdc, and offer an 800Vdc to 1200Vdc operating input range. The 500W converters deliver 36V, 48V, 110V, 125dc or custom outputs.

The PFC 319-D4 Series of IP66-rated AC-DC power supplies with active power factor correction (PFC) deliver up to 500W. The units are designed for heavy-duty industrial applications that require protection from the ingress of water from powerful jets, fog, sand, metal dust, dust, oil, insects and other contaminants.