HVI 500-1K-XX-FX Series of DC-DC converters


DC-DC Power Converters, High input voltage, Industrial Solutions, Latest News

1000Vdc (800Vdc-1200Vdc) Input, rugged industrial DC-DC converters deliver 500W


Conduction/convection cooled step-down converters offer ultra-high DC-input voltages and wide DC-input ranges

DC-DC converters offer 1000Vdc nominal input with 800Vdc to 1200Vdc operating input range

The HVI 500-1K-XX-FX Series of DC-DC converters are designed for rugged industrial applications that require high input voltages and wide DC-input ranges. The converters accept a nominal input voltage of 1000Vdc with an 800Vdc to 1200Vdc operating input range.

The 500W DC-DC converters provide 36V, 48V, 110V, 125dc or custom outputs. An optional built-in redundancy diode allows for a number of units to be connected in parallel to achieve higher output power or N+1 redundancy. The output separation diode also makes the units suitable for battery charging applications. An output-fail alarm (Form C) and remote shutdown or enable are available on request.

To ensure high reliability and long operating life, all critical components on the primary side are designed and tested for corona inception levels that are significantly higher than the operating voltages. The design is verified for 5600Vdc input to output isolation and production level testing is 4300Vdc input to output.

The input and output are filtered for low noise. The input meets EN55022 Class A with wide margins. Class B is available on request. This ensures that the unit can be used in EMI sensitive environments without additional filtering. The converters comply with the requirements of EN/IEC 61010-1 and related standards. Electronic protection includes inrush current limiting, reverse polarity protection, output current limiting, short-circuit protection and self-resetting thermal shut-down in the case of insufficient airflow.  Low component count, large design headroom, and the exclusive use of components with established reliability also contribute to ensuring that the unit delivers many years of problem free operation.

The HVI 500-1K-XX-FX converters are cooled by conduction via baseplate. Additional cooling is achieved by natural convection through the cooling slots. All heat generating components are installed on aluminum heatsink blocks which are thermally connected to the base plate. This enables operation over a 0°C to +50°C temperature range without the need for derating. Wider temperature ranges are available on request. Efficiency is a minimum of 80% at full load depending on input/output configuration.

The compact units measure 153 x 67 x 358 mm (W x H x D). They are ruggedized to ensure immunity to shock and vibration (IEC 61373 Cat 1 A&B), which makes them suitable for operation in extreme environments. The internal boards are conformal coated for protection from moisture, humidity and airborne contaminants.

To discuss this converter or any of your power conversion requirements, please contact us.

Key Specifications

  • Input: 1000Vdc nominal (800Vdc to 1200Vdc operating range);
  • Output: 36V, 48V, 110V, 125dc or custom;
  • 500W continuous output power;
  • 0°C to +50°C operating temp. range for full spec. (no derating);
  • EMI: EN55022 Class A (Class B optional);
  • Designed for compliance with for compliance with EN/IEC61010-1;
  • Conformal coating for protection against humidity & airborne contaminants;
  • 80% efficiency at full load;
  • Full electronic protection;
  • Mechanical package FX: 153 x 67 x 358 mm (6″ x 2.7″ x 14.2″) H x W x D.

 

Data sheet – HVI 500-1K/XX-FX Series High input voltage DC-DC

 

Your requirements – Request a Quotation

 

Leave a Reply

Your email address will not be published. Required fields are marked *