The FTP 1K-F7W 3-phase AC-AC frequency converter uses microprocessor controlled high frequency PWM technology to generate up to 1kVA output power with pure sine wave output voltage, from a single-phase input.
The CSI 100-24V24AH-AA-PEL portable inverter system with built-in battery bank and charger is designed for operation in heavy-duty applications in the field. The output is a pure sine-wave voltage suitable for delicate test equipment and similar loads. The charger section operates from typical AC voltages worldwide.
The HVT 5K-1200/24-4U7 high input voltage (1200Vdc), wide input range (1000-1400Vdc) DC-DC converter is designed for driving low voltage 24Vdc equipment in 5kW applications. The converter is typically designed into power systems that transmit high voltage and high power over long distances.
The BCP 130-PEL heavy-duty switch-mode battery charger was designed for charging an external 100Ah/12V (10, cell) Nickel Metal Hydride (NiMH) battery in railway and industrial environments. Housed in a splash-proof Pelican top loader case with a sturdy handle. This charger offers easy portability and manual initiation of a charge cycle are key requirements.
New heavy-duty fan filters prevent dust, dirt and other airborne contaminants from being drawn into power systems by their internal fans. This solution resolves a common challenge for fan cooled electronic equipment operating in harsh industrial environments.
300VA AC-AC frequency converters provide 115Vac at 60Hz or 400Hz, or 230Vac at 50Hz from a universal PFC input (95V to 264Vac). The units are suitable for operation in power utilities, mining, marine, industrial automation and transportation applications.
IN STOCK: The MIW 100-U/12-F0PD-HF AC-DC power supply delivers up to 100W output power. The unit accepts a wide, universal input range (95V to 264Vac) and provides 12Vdc at 8.4A. Heat-sink fins on the side of the unit ensure proper cooling at +60ºC ambient temperature.
PFHI 5K-3U7 series of high input voltage, wide input range AC-DC switching power supplies with active power factor correction (PFC) are designed for 5kW industrial applications. The units operate over a 340-460Vac AC-input range; 400Vac 3-phase nominal input.
The RWY 200-D2 (IP66) Series of railway quality DC-DC converters meet the requirements of EN50155. The converters are enclosed in IP66-rated die cast aluminum packages with sealed connectors, which provide protection from the ingress of moisture, sand, oil, metallic dust and other contaminants.
The CTP 1K-3U3SF series 1kVA 3-phase DC-AC inverters offer 3-phase continuous outputs of 208Vrms (line-to-line) at 60 or 400Hz, or 3-phase 380Vrms or 400Vrms (line-to-line) at 50 or 60Hz. Phase-to-neutral voltages of 115Vrms, 220Vrms or 240Vrms can also be used. The units operate from DC voltages of 24V, 48V, 110V, 125Vdc or custom.
