Heavy-duty, Portable Charger for 100Ah/12V NiMH Batteries


BCP-130-PEL-200x160

ABSOPULSE Electronics BCP 130-PEL heavy-duty switch-mode battery charger was designed for charging an external 100Ah/12V (10, cell) Nickel Metal Hydride (NiMH) battery in railway and industrial environments. Housed in a splash-proof Pelican top loader case with a sturdy handle, this charger is well suited to applications where ruggedness, easy portability and manual initiation of a charge cycle are key requirements.

With a 95-264Vac universal input range, the BCP 130-PEL operates from all typical AC voltages worldwide. The input includes a power factor correction stage. Battery voltage and battery temperature, determinants of charge status, are monitored during the charge cycle. The battery temperature is monitored by an external sensor, which is connected to the charger via a 2-pole circular connector. If temperature monitoring is not required, the temperature sensor is simply not connected. The charging process is terminated when either the battery voltage reaches 13.5V or the battery temperature exceeds 50°C, when the charger disconnects from the battery via the contacts. The charger disconnect is latching type; for safety reasons, the circuit will not re-initiate automatically, even in case of input power re-cycling – it must be initiated manually by pushbutton. Disconnect values can be made customer-specific.

A breaker and an internal crowbar diode on the charger output protect against reverse connection of the battery to the charger. Full electronic protection minimizes the possibility of failure due to abnormal operating conditions, including application errors. The BCP 130-PEL complies with EN/UL60950-1 and equivalent industrial safety standards as well as the EN61000-3-2 directive for low input harmonic distortion. The unit is filtered to meet EN55022 Class A EMI standards with margins.

All printed circuits are conformal coated and heavily ruggedized for immunity to shock, vibration and moisture. The charger is convection cooled and operates over a 0°C to +50°C temperature range without de-rating. Wider temperature ranges are also available.

Custom options, versions with higher output power and versions for different battery chemistries and voltages, are also available.
Absopulse offers an extensive selection of dc-output battery chlargers designed for operation in harsh environments. These rugged designs can be modified to meet customer requirements. We also provide fully-custom solutions with low set-up costs.

Rather than searching this website for an existing ABSOPULSE design for your application requirements, please contact us and we will recommend an optimal solution for you.

 

Specifications for BCP 130-PEL Series.

 

 

 

Leave a Reply

Your email address will not be published.