The BAP 319R-HSA-F4 series of railway quality DC-DC converters deliver up to 500W with natural convection cooling. The converters can be mounted on a chassis or DIN-rail. No fans or installation on a heat-sinking surface required.

The RSI 1K-HSA-F31 series of railway DC-AC sine wave inverters deliver up to 1000VA with natural air convection – no forced air or attachment to a heatsinking surface is required. The series meets the requirements of EN50155 for electronic equipment used on railway rolling stock.

The DC-DC converters are designed for rugged industrial applications that require high input voltages and wide DC-input ranges. The units accept a nominal input voltage of 1000Vdc, and offer an 800Vdc to 1200Vdc operating input range. The 500W converters deliver 36V, 48V, 110V, 125dc or custom outputs.

The LTH 65R-F3-HSA series of heavy-duty railway DC-DC converters deliver up to 250W with convection cooling. Designed to float charge hold-up batteries that run railway on-board peripheral equipment, the units are also suitable for other transportation and industrial applications.

The PFC 252R-HSA-F3 series of dual output railway AC-DC power supplies with PFC-input offer pure convection cooling by a heatsink assembly attached to their under-surface. The converters can be mounted to a chassis or DIN-rail.

The PFC 65R-D3 series IP66-rated, rugged railway quality AC-DC power supplies with active PFC-input deliver up to 300W output power. The units convert a universal AC-input voltage of 95-264Vac to 24Vdc, 48Vdc or 110Vdc.

1000VA, IP66-rated DC-AC sine wave inverter with convection cooling is designed for applications where a suitable heatsinking surface is not available. The inverter converts 24Vdc (21-230Vdc range) input to 230Vac continuous at 50Hz

The RWY 200-HSA-P2 series of fully encapsulated railway quality DC-DC converters offer pure convection cooling by a heatsink assembly attached to their under-surface. The converters can be mounted to a chassis or DIN-rail.