The PFC 2K-U5512L AC-DC universal input power supplies deliver up to 2000W continuous output power. They use active power factor correction to convert a universal input (95V to 264Vac) to 12Vdc, 24Vdc, 28Vdc, 48Vdc, 54Vdc or 125Vdc.

The PWI series of fully encapsulated AC-DC power supplies use field-proven topology to deliver to deliver up to 150W output power. The power supplies deliver a single regulated output of 12Vdc, 24Vdc, 48Vdc, 125Vdc or custom and accept a universal input of 95Vac-264Vac. DC-input options are available on request.

The BAP 319-D4, 500W, heavy-duty, industrial DC-DC converters in IP66-rated diecast aluminum enclosures are immune to the effects of powerful jets of water, metallic dust, dust, fog, sand, oil, salt, insects and other environmental contaminants. The converters accept 24Vdc, 48Vdc, 125V or custom input and provide a single output of 12Vdc, 24Vdc, 48Vdc, 125Vdc or custom.

The BAP 65-D3 heavy-duty, industrial DC-DC converters in IP66-rated diecast aluminum enclosures are immune to the effects of powerful jets of water, metallic dust, dust, fog, sand, oil, salt, insects and other environmental contaminants. Inputs include 24Vdc, 48Vdc, 125V or custom. Outputs include 12Vdc, 24Vdc, 48Vdc, 125Vdc or custom.

The PFC 1K5-U5512L AC-DC power supplies with universal input deliver up to 1500W continuous output power. They use active power factor correction to convert a universal input (95V to 264Vac) to 12Vdc, 24Vdc, 28Vdc, 48Vdc, 54Vdc or 125Vdc.

The BAP 319-F4 industrial quality DC-DC converters deliver up to 500W output power with convection cooling. Regulated outputs include 12V, 24V, 48V or 125Vdc.  The converters operate from 24Vdc, 48Vdc, or 125Vd.

The FTP 1K-F7W 3-phase AC-AC frequency converter uses microprocessor controlled high frequency PWM technology to generate up to 1kVA output power with pure sine wave output voltage, from a single-phase input.

The CSI 100-24V24AH-AA-PEL portable inverter system with built-in battery bank and charger is designed for operation in heavy-duty applications in the field. The output is a pure sine-wave voltage suitable for delicate test equipment and similar loads. The charger section operates from typical AC voltages worldwide.

The HVT 5K-1200/24-4U7 high input voltage (1200Vdc), wide input range (1000-1400Vdc) DC-DC converter is designed for driving low voltage 24Vdc equipment in 5kW applications. The converter is typically designed into power systems that transmit high voltage and high power over long distances.

The BCP 130-PEL heavy-duty switch-mode battery charger was designed for charging an external 100Ah/12V (10, cell) Nickel Metal Hydride (NiMH) battery in railway and industrial environments. Housed in a splash-proof Pelican top loader case with a sturdy handle. This charger offers easy portability and manual initiation of a charge cycle are key requirements.