The FC 2KP-EW/A Series modular AC-AC frequency converter system was designed to deliver a clean sine-wave output from ″dirty″ generator voltage under extreme environmental conditions.

The PDC 250-HSA-P59 series of fully encapsulated DC-DC converters are convection cooled via a heatsink assembly fins. The 250W units are entirely potted with a thermally conductive MIL-grade silicon rubber compound, which provides immunity to shock, vibration, moisture, dust, salt and other contaminants, and ensures heat dissipation throughout the modules.

The RWR 212-P200L series of RIA12 railway DC-DC converters have an input voltage surge withstand capacity 3.5 times greater than the nominal input voltage for 20 milliseconds. The 200W converters meet the requirements of EN50155 for electronic equipment used on railway rolling stock.

This series of fully encapsulated, wide input range DC-DC converters deliver up to 200W for redundant and parallel operation in rolling stock and other heavy duty environments. The converters meet the requirements of EN 50155.

This series provides a 120W corona free, 20kV Isolated DC-DC converter solution. The converters were developed for powering electronic circuits floating on several kilovolts of operating voltage. They are typically used for high power gate drivers and similar applications in oil and gas, mining, railway and industrial environments.

This ultra-rugged 3-phase convection cooled power supply is designed for driving low voltage 24V, 48V, or 125Vdc equipment in severe environments. Typical applications include electro-mechanical lifting and positioning equipment, winches, pumps, and other industrial machinery and equipment.

The RWY 200-HSA-P2 series of fully encapsulated railway quality DC-DC converters offer pure convection cooling by a heatsink assembly attached to their under-surface. The converters can be mounted to a chassis or DIN-rail.

The RWY 35-P30 fully encapsulated DC-DC converters are designed for low power rolling stock and harsh environment applications. The converters deliver any single regulated output from 5Vdc to 110Vdc. The units accept 24Vdc, 36Vdc, 48Vdc, 72Vdc, 96Vdc or 110Vdc with wide EN50155 input ranges.

The 100W encapsulated railway DC-DC converters offer input voltage surge-withstand capability to meet RIA12 (3.5Vn for 20msec). They also meet requirements of EN50155 for electronic equipment used on railway rolling stock.

The RWR 252 series of fully encapsulated, dual output, railway quality dc-dc converters deliver up to 250W. With an input surge withstand capability of 3.5Vn for 20msec., the converters meet RIA12, the general specification for the protection of traction and rolling stock equipment from transients and surges in DC control systems.