Converters deliver up to 500W with conduction/convection cooling – no fans required
DC-DC converters deliver up to 500W with conduction/ convection cooling – no fans required
The BAP 319-F4 series of industrial DC-DC converters use high efficiency power conversion topology to deliver up to 500W output power with convection cooling.
Outputs include 12V, 24V, 48V or 125Vdc. The converters operate from 24Vdc (21-29V), 48Vdc (42-56V), or 125Vd (105-145V). A 12Vdc input is possible with derating to lower output power. Custom input/output values are available on request. An optional redundancy diode allows parallel connection to achieve higher output power or N+1 redundancy. An output fail alarm is also available on request.
The BAP 319-F4 DC-DC industrial quality converters are designed for compliance with meet EN 62368-1 and equivalent safety standards. Electronic protection includes 1500Vdc input-output isolation, inrush current limiting, reverse polarity, over voltage, over temperature and short circuit conditions. The input and output are filtered for low noise. The input meets EN 55032 Class A with wide margins.
The converters operate at full specification over a 0°C to +50°C operating temperature range without derating. Cooling is by conduction to customer heat sink or chassis and by natural convection. This series is housed in a rugged, compact, vented 130 x 62 x 351 mm enclosure.
To discuss this converter or any of your power conversion requirements, please contact us.
ABSOPULSE Electronics is an original equipment manufacturer (OEM) of an extensive range of railway and industrial grade power conversion solutions. We specialize in fully custom solutions. All of our existing designs can also be modified to meet customer application requirements.
Key Specifications
- 500W industrial quality DC-DC converter;
- Input: 24Vdc (21-29V), 48Vdc (42-56V), 125Vd (105-145V), 12Vdc input with derating;
- Output options: 12V, 24V, 48V or 125Vdc or custom;
- Optional redundancy diode for parallel connection or N+1 redundancy;
- 85% efficiency at full load depending on input/output configuration;
- Cooling by convection and conduction to customer heatsink or chassis;
- 0°C to +50°C operating temperature range without derating;
- Designed to meet EN 62368-1 and related standards;
- EMI: EN 55032 Class A with margins;
- F4 chassis: 130 x 62 x 351 mm W x H x L.
Data sheet – BAP 319-F4
Your requirements – Request a Quotation
Copyright © ABSOPULSE Electronics Ltd.
