100VA Sinewave inverter with built-in battery and charger. Portable splash-proof Pelican top-loader case for field applications. Dimensions: 43 x 24.4 x 34.1 cm (L x W x D) Please click on photo for generic data sheet.
The CSI 100-24V24AH-AA-PEL is a portable inverter system with built-in battery bank and charger.
This 100VA inverter system provides a regulated pure sinewave output voltage of 115Vac continuous at 60Hz. Outputs of 115Vac/400Hz and 230Vac/50Hz are also available.
The built-in battery charger section operates from typical AC voltages worldwide, and provides 27.6V float voltage at 2A current to charge the 24V/24Ah battery bank. The charger can be kept on standby mode indefinitely, ensuring that the battery is continuously maintained.
The battery bank, which contains two 12V/24Ah sealed lead acid batteries with fused terminals, provides a minimum of 3 hours backup power at full 100VA output, and up to 7 hours at reduced power. A depleted battery bank takes approximately 15 hours to reach full charge. 24Vdc power can also be drawn directly from the battery at 6A maximum to run other 24Vdc input equipment such as small motors, pumps and DC-input instruments. This design is typically customized to meet customer application requirements.
This inverter system is heavily ruggedized and conformal coated, and housed in a splash proof Pelican top loader case with a sturdy handle for easy portability in the field. It is convection cooled and operates over a 0C to +50C temperature range without de-rating. Extended temperature ranges are available.
The units have filtering on the input and output for low noise and are designed to meet either EN 55032 Class A with margins. They are designed to meet international safety standards including EN 62368 and related UL and CSA requirements. Full electronic protection minimizes the possibility of failure due to abnormal operating conditions, including application errors. Generous design headroom and the use of designed-in components with established reliability result in a high MTBF and lower life cycle costs.
ABSOPULSE Electronics is an original equipment manufacturer (OEM). We offer an extensive range of industrial and railway grade AC-output power conversion products which are all designed and manufactured in-house.
Rather than searching this website for an existing ABSOPULSE design for your application requirements, please contact us and we will recommend an optimal solution for you.
Key Specifications
- 100VA Continuous sinusoidal output voltage;
- AC-output: 115Vac/60Hz (400Hz also available), or 230Vac/50Hz;
- Charger section operates from 95-264Vac universal input:
- Charging voltage: 27.6V±0.2V/3A;
- Built-in backup battery;
- Battery recharge time: approx. 15 hours for empty battery. The built-in charger provides float
charging and can be kept on standby mode infinitely; - EMI: EN 55032 Class A with margins;
- Designed to meet EN 62368-1 and related industrial standards;
- Cooled by natural convection;
- Operating temperature: 0°C to +50°C for full spec. Extended temp. range available;
- Charger ON LED visible through cooling slots;
- Full electronic protection;
- Heavy ruggedizing and conformal coating;
- Housed in Pelican #1430 top loader splash proof case: 43 x 24.4 x 34.1 cm (L x W x D).
Generic Specifications – CSI 100-24V24AH-UA-PEL
Your requirements – Request a Quotation
Copyright © ABSOPULSE Electronics Ltd.
