New railway DC-AC pure sine wave inverters with natural air convection cooling via a heatsink assembly block – no forced air or attachment to a heatsinking surface required
1000VA Convection cooled railway DC-AC sine wave inverters for electrical equipment installed on railway rolling stock, trackside and industrial applications.
Wide EN50155 input ranges
The RSI 1K-HSA-F31 series is available with supply voltages of 36Vdc (25–51V range), 48Vdc (33-67V), 72Vdc (50-101V), 96Vdc (67-135V), 110Vdc (77-154V) or custom. A 24Vdc (17-34V) input version is available with derating to 750VA output power. The series offers a single sine wave output of 115Vac continuous at 60Hz or 400Hz, or 230Vac continuous at 50Hz. Custom output values are available on request. Efficiency at full load is typically 80%, depending on input voltage. An optional output-fail alarm (Form C) and remote shutdown or enable are available on request.
F31-HSA heatsink assembly with fins enable natural air convection cooling. This mechanical structure allows the unit to be mounted on uneven and thermally non-conductive surfaces. No fans or installation on a heat-sinking surface required.
Meet requirements of EN50155 for electronic equipment used on railway rolling stock
The railway quality sine wave inverters meet the requirements of EN50155 for electronic equipment used on railway rolling stock. They are suitable for a broad range of on-board and trackside infrastructure applications. Equipped with heavy filtering on the input and output, the units meet the requirements for EN50121-3-2 (EMI). The inverters also meet EN61000-4-2 (ESD), EN61000-4-3 (RF Immunity), EN61000-4-4 (Fast Transients), and EN61000-4-6 (Conducted Immunity). They meet C22.2 No. 107.1-01, UL 458 and EN/UL60950-1 and equivalent industrial safety standards.Comprehensive electronic protection
Protection features include 1500Vdc input-output isolation, reverse polarity protection, current limiting with short-circuit protection and thermal shutdown in case of insufficient cooling.Rugged mechanical construction
The F31 package with the attached HSA-F31 heatsink assembly measures 572 x 150 x 356 mm / 22.5” x 5.9″ x 14″ (W x H x L). The converters are ruggedized to withstand high levels of shock and vibration to IEC 61373 Cat 1 A&B. The internal boards are conformal coated to provide protection from humidity and airborne contaminants.Industrial quality sine wave inverter
The CSI 1K-HSA-F31 series is an industrial quality version of this design that is suitable for heavy-duty applications that require cooling by natural air convection.Custom and customized designs
ABSOPULSE Electronics is an original equipment manufacturer (OEM) specializing in the design and manufacture an extensive range of custom and standard industrial and railway quality power conversion solutions. We offer one of the broadest selections of sine-wave inverters available on the market today. All of our designs are built in-house.Key Specifications
- 1000W railway quality AC-DC sine wave inverter. Industrial version available;
- Input: 36V, 48V, 72V, 96V, 110Vdc with EN50155 input ranges. 24Vdc input derated to 750VA;
- Output: 115Vac continuous at 60Hz or 400Hz or 230Vac continuous at 50Hz;
- Natural air convection cooling via a heatsink assembly block;
- -25°C to +55°C operating temperature range – no derating;
- Railway version complies with EN50155 for electronic equipment on railway rolling stock;
- EMI: EN50121-3-2;
- Meet EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-6 and EN45545;
- Ruggedized to withstand shock and vibration (IEC61373 Cat 1 A&B);
- Efficiency: typically 80% at full load – input voltage dependent;
- Full electronic protection;
- F31 package with attached HSA-F31 heatsink assembly 572 x 150 x 356 mm / 22.5” x 5.9″ x 14″ (W x H x L)
