1500W Portable PFC-input AC-DC Battery Charger for Field Applications

Heavy-duty battery charger in portable splash-proof enclosure with handles

Battery charger with PFC-input in a splash-proof Pelican case with a sturdy handle for field applications.

Battery charger with PFC-input in a splash-proof Pelican case for field applications.

ABSOPULSE’s BCP 1K5-PEL heavy-duty PFC-input AC-DC battery charger was designed for charging an external battery in industrial environments. Housed in a splash-proof Pelican top loader case with a sturdy handle, this charger is well suited to applications where ruggedness, easy portability and manual initiation of a charge cycle are key requirements.

The BCP 1K5-PEL portable battery charger uses high-frequency conversion technology to deliver up to 1500W continuous output power. This charger was designed to charge a 400V lithium-ion battery; other battery configurations are also available. It has an automatic two step charge mode: it runs at full 4A charging current until the pre-set voltage threshold of 380V is reached, then switches to a lower 1A maintenance current.

An analog voltmeter and an ammeter, located on the upper surface of the unit, indicate charge current and battery voltage status. Different thresholds for 4A/1A switchover point and open circuit voltage are available on request. A built-in output separation diode prevents battery discharge back into the charger if the AC is disconnected. The input accepts either 115Vac or 230Vac, factory set. Power factor correction is available on request.

The BCH 1K5T-400 is conformal coated, heavily ruggedized and it is housed in a water-proof Pelican case with a sturdy handle for portability and easy use in the field. The case measures 502 x 401 x 190 mm and the entire unit weighs approximately 12 kilograms.

Built-in fans provide sufficient airflow for operation at full specification over a 0°C to 50°C temperature range. Extended temperature ranges are available. Protection includes inrush current limiting, over-voltage protection, short circuit protection, a self-resetting thermostat for thermal protection. The output is protected against reverse battery connection by built-in crossbar diode and output breaker.

Rather than searching this website for an existing design for your application requirements, please contact us and we will recommend an optimal solution for you.

Generic Data sheet – BCP 1K5-PEL Series

Your requirements – Request a Quotation

Copyright © ABSOPULSE Electronics Ltd.

Leave a Reply

Your email address will not be published. Required fields are marked *